A Leicester company has been prosecuted for failing to install adequate guarding on an electric gate that trapped a young child at a primary school in Stourbridge.
Dudley Magistrates’ Court yesterday (10th July) heard that on 25 September 2012, an eight-year-old boy was injured when his head became trapped between the edge of the closing gate and the gate post. The youngster suffered significant bruising to the right side of his head and ear.
His father, who witnessed the incident, tried desperately to hold the gate to stop it closing further and managed to pulled it open enough to release his son’s head.
An investigation by the Health and Safety Executive (HSE) found the entrance gate at Pedmore Primary School had been automated by Access Control Solutions (UK) Ltd but the company had failed to fit suitable guarding.
The company had identified the need for the guarding but not fitted it because the gate, which had been manufactured by a different company, was not the exact style expected and the guarding would not fit.
Access Control Solutions (UK) Ltd, of Boston Road, Leicester, pleaded guilty to breaching Regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 and was fined £3,300 with £773 costs.
After the hearing HSE inspector Sarah Palfreyman said:
Dudley Magistrates’ Court yesterday (10th July) heard that on 25 September 2012, an eight-year-old boy was injured when his head became trapped between the edge of the closing gate and the gate post. The youngster suffered significant bruising to the right side of his head and ear.
His father, who witnessed the incident, tried desperately to hold the gate to stop it closing further and managed to pulled it open enough to release his son’s head.
An investigation by the Health and Safety Executive (HSE) found the entrance gate at Pedmore Primary School had been automated by Access Control Solutions (UK) Ltd but the company had failed to fit suitable guarding.
The company had identified the need for the guarding but not fitted it because the gate, which had been manufactured by a different company, was not the exact style expected and the guarding would not fit.
Access Control Solutions (UK) Ltd, of Boston Road, Leicester, pleaded guilty to breaching Regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 and was fined £3,300 with £773 costs.
After the hearing HSE inspector Sarah Palfreyman said:
“This was an extremely traumatic event for the boy and his father. Fortunately, the youngster was back at school a couple of days later and he has not suffered any long term effects. However, it could have been a different story had he been trapped by a different part of his head, or had it happened to a younger child.
“The incident was entirely preventable. Access Control Solutions identified the need for the guard in their own job specification but when the gate arrived, it was not the type expected the guard did not fit. At this point they should have either come up with an alternative or postponed the job until the problem was rectified, especially as they were fully aware that the entrance would be used by a particularly vulnerable group – young children.
“People getting trapped a well-known risk in the industry and HSE has produced safety notes on the subject due to a number of fatalities involving children in recent years. I would encourage all suppliers and installers of electric gates to read it.”
The boy’s father said:
“I had gone to collect him from the after school activity club and he ran towards the gate, which was still open. I told him to stop and wait for me and as he did I saw the gate was closing and was touching his shoulders. Realising the danger I leapt to the gate but by then it was on his head and he was screaming.
“I was pulling it with all my strength. It nearly beat me but managed to pull it enough to get his head out.
“It shook the whole family. My son talks about it now and again. He thinks it was his fault, that he did something wrong. That upsets me as much as the incident itself.”
Guidance of the installation of electrically powered gates and the risks to pedestrians is available at www.hse.gov.uk/safetybulletins/electricgates2.htm
Regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 can be found at www.legislation.gov.uk
Our earlier post based on the report by the Leicester Mercury can be accessed here.
In the Gate Industry?
If you are in the gate industry and want to make sure your company complies with legislation, find out more about the DHF training courses available to members and non-members here: www.dhfpoweredgategroup.co.uk
***** Don't Miss the Latest News - Receive these Posts by Email *****
* Read more current and archived articles on our dedicated website *
Low Cost and Free Publicity - Your company can easily benefit from some publicity like this in return for a contribution towards our layout costs (typically £30 plusVAT), payable via PayPal or credit card or receive the service absolutely free of charge if you advertise (see below).
We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.
To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.
If you take display advertising or product and literature features in our printed and online publications, you will qualify for regular free postings on this blog while you continue to advertise with us.
For details on features and advertising rates please contact us or visit our website.
Door Industry Journal is a trading style of Avalon Innovations LLP Company Registration No. 06807833
No comments:
Post a Comment