Tuesday, 18 January 2022

Tentoma launches new Door Packaging Line providing 100% Sealed Packaging

Using RoRo StretchPack® the door is packed into a tubular stretch film.
The tubular film is sealed in both ends during the packaging to ensure
100% sealing. Packaging and sealing are done in one operation.

It is essential that door packaging is 100% sealed, to protect the doors from losing attractiveness and value before they reach end-users. 

For that reason, Tentoma launches a full RoRo StretchPack® packaging line for 6-sided sealed door packaging. The new packaging line includes the following functionalities dedicated to the door manufacturing industry:

  • The door is lifted for mounting of corner protection
  • The door is centred on the infeed conveyor
  • The door size is measured (width x height)
  • The door is packed and sealed in one operation


Using RoRo StretchPack®, the door is packed in a tubular stretch film. It provides a 6-sided packaging, with a short 100% waterproof sealing in each end. It protects the door against the penetration of dirt and moisture during storage and transportation.

Jane Tønder, Head of Sales at Tentoma, who has developed the RoRo StretchPack® technology says:
“We have seen more door manufacturers shifting to use RoRo StretchPack® for packaging.” 

She continues: 

” That is the reason why we have developed this complete packaging line to the door manufacturing industry. It can be installed as a standalone solution or as an inline solution in a fully automated production line. The final configuration will of course always be based on customers’ requirements”.

The RoRo StretchPack® technology is based on the proven vertical stretch hood packaging of e.g. pallet. Tentoma has developed the technology further, so RoRo StretchPack® is able to perform a horizontal 6-sided sealed packaging in just one operation. RoRo StretchPack® is very suitable for packaging large goods like doors, tabletops, and similar.

The new RoRo StretchPack® door packaging line. The packaging line can
be equipped with more film roll stations to different door sizes and brandings.
Depending on thickness each roll can contain up to 6 km film.

A film saving packaging solution

RoRo StretchPack® is single layer packaging, in contrast, to e.g. orbital wrapping. The stretch film gives a tight packaging, where the film fits close to the door. Together, these properties prevent excessive use of film. When customers shift to RoRo StretchPack®, they typically see reductions in film consumption between 25-60% compared to conventional packaging methods.

Remove heat shrink from the packaging line

RoRo StretchPack® is a cold packaging process, which means that you can remove any heat shrink ovens from the packaging line. Thereby you reduce your energy consumption significantly. In contrast to heat shrink packaging, RoRo StretchPack® performed high repeatability and uniform packaging. It also ensures that branding printed on the stretch film is exposed nice and uniform on the packaging.

Benefits of RoRo StretchPack®
  • 100% sealed and waterproof packaging
  • Packaging and sealing in one operation
  • Film savings up to 60%
  • Energy saving up to 90% - by removing heat shrink
  • Tight, smooth, and nice packaging
  • Uniformed packaging suitable for branding




Learn more at www.tentoma.com

Tentoma A/S 
Smøl 1 
DK-6310 Broager
Denmark

Phone: +45 81 40 79 51




Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£60 to £80 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

No comments:

Post a Comment