Jewers Doors’ local reseller, Rumaillah Warehouse Equipment WLL, has recently completed the installation of thirty sets of Swift-SEW automatic bi-folding doors for the new Lusail Light Rail Transit (LRT) depot complex in Qatar.
Lusail LRT began construction in 2018 as part of an urban development project north of Doha, the capital of Qatar. The scheme will provide an efficient transportation system for the people living in, and commuting to the new Lusail City, where the new 80,000-seat Lusail Stadium will host the 2022 FIFA World Cup Final.
Working closely alongside Rumaillah, Jewers started design works with the QDVC-Alston consortium in 2012, eventually winning the order in 2017 and shipping the doors from its UK manufacturing base in early 2018.
The first phase of the project was finished in 2020, but not open to the public until Jan 2022. A six-station network on the Lusail Tram's Orange Line was opened to the public on 1st January 2022, marking the beginning of the entire tram network's operation. A seventh station, the Lusail Central, was opened to the public on 9th April 2022.
The thirty sets of 6.45m high electrically operated Swift-SEW doors were installed on three depot buildings. Six sets are on the Service Station, which incorporates the wash bay, twelve sets within the Maintenance Building and an additional twelve sets on the Stabling Depot, which houses the trams when they are not on the dusty streets of Qatar.
Individual doors automatically open and close as a tram slowly passes through a sequence of photo beams on either side of the door opening. These beams also act as safety devices to prevent the doors from closing until the tram has fully cleared all beams, and together with full height safety edges provide ultimate safety for trams and personnel alike.
Each Swift-SEW door comprises four highly insulated, steel composite panels, which are hinged to the jambs with two leaves folding to each side clear of the opening. Door leaves are finished in a special 'cool finish' coating to reduce heat absorption through the door and are fitted with multi-wall EPDM rubber seals to all edges to reduce, air and dust and water ingress. The combination of finish, and high-density insulation helps to keep the blistering heat out and maintain the cooler conditions within the depot buildings.
Doors are operated by a powerful, centrally mounted SEW drive unit, combined with a purpose-designed PLC control panel incorporating inverter control for smooth operation. Opening time is under eight seconds, and in the event of power failure, a low-level disengage handle enables the doors to be instantly opened from ground level.
Eighteen of the doors are fitted with wicket doors, allowing authorised personnel to pass through the opening easily and safely without the need to open the main doors. For visibility and natural light, all door leaves are fitted with a 600 x 600mm argon-filled, toughened glass, double-glazed vision panel.
A high-level 850mm x 760mm cut-out allows the door to safely close around the overhead line equipment (OLE). This cut-out is lined with a dielectrically rated rubber sheet tested to 30kVA, which is designed to prevent bird entry and reduce dust ingress. As standard, the door is earthed back to the structure with suitably rated earth bonding braids.
Jewers' Regional Sales Manager: Ben Pritchard commented:
"Jewers Doors have been approved for installation by many agencies in the Middle East. Our doors not only meet the high standards specified for major infrastructure projects, but the current exchange rate means Jewers offer excellent value. With our office in Dubai and locally based resellers in each GCC country, Jewers are ideally placed to provide a world class service throughout the Middle East."www.jewers.co.uk
>> Scroll down to read more articles like this which have been published recently on this blog <<
You can also read additional current and archived articles on our dedicated magazine website
Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£60 to £80 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).
We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.
To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.
If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.
Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.
For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.
Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751
No comments:
Post a Comment