When the Regulatory Reform (Fire Safety) Order 2005 (or RRO as it’s known) came into effect in 2006 it provided a real shake-up in the way the passive and active fire protection elements of buildings are specified, installed and maintained.
It placed the legal responsibility squarely on the shoulders of building owners and operators - the Responsible Person - to conduct risk assessments on the buildings under their supervision with an emphasis on preventing fires and reducing fire risk.
Now, changes under Article 24 of the RRO are coming into force from 23 January 2023 to cement the legal requirements for Responsible Persons to carry out regular inspections and maintenance of fire doors. It applies to multi-occupancy residential buildings in England over 11 metres (more than 3 storeys).
Fire doors - specially engineered doors designed to contain a fire for a period of time as part of a layered fire protection system within a building – were highlighted as essential to fire safety in Phase 1 of the Grenfell Tower Enquiry: “Fire doors play an essential role in preventing or inhibiting the spread of smoke and toxic gases and in preserving the effective compartmentation of buildings.”
Article 24 of the RRO now requires, in law, the Responsible Person to provide information to Fire and Rescue Services to assist them to plan for the event of a fire and, if needed, to provide an effective operational response. This will now include a requirement for them to:
- undertake quarterly checks of all fire doors (including self-closing devices) in the common parts
- undertake - on a best endeavour basis - annual checks of all flat entrance doors (including self-closing devices) that lead onto a building’s common parts.
This will bring the RRO into line with the Fire Safety Act 2021, removing the legal ambiguity over whether flat entrance doors that open into common parts should be routinely considered as part of the fire risk assessment process. The Fire Safety Act 2021 confirmed that flat entrance doors are indeed included and these new changes to the RRO endorse that, bringing the legislation and regulations into line.
While the changes to the RRO only refer to buildings over 11m, the Responsible Persons for residential buildings below that height still have a duty to install and maintain general fire precautions in including making sure that all fire doors – including flat entrance doors – provide adequate protection. The changes to the RRO do not remove or replace these legal obligations.
The most straightforward way for a Responsible Person to demonstrate that the fire doors are compliant and properly maintained is to have a formal fire door register that records inspection and maintenance records, maintaining the Golden Thread and providing an audit trail for every single door to ensure total compliance throughout its life. These inspections need to be carried out by a third-party accredited specialist company for assured compliance.
The Government has published a Fact Sheet to help guide Responsible Persons through the new regulations. But if you need help with inspecting, repairing, maintaining or replacing fire doors, why not speak to the experts at Onyx?
Their fire door installation and maintenance services are certified under the BM Trada Q Mark Scheme and as well as providing a full on-site service, we can provide full O&M manuals to confirm that every fire door is compliant with building regs and the new requirements of the RRO.
>> Scroll down to read more articles like this which have been published recently on this blog <<
You can also read additional current and archived articles on our dedicated magazine website
Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).
We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.
To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.
If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.
Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.
For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.
Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751
No comments:
Post a Comment