Delivering high-quality and durable ironmongery for a pioneering education project

The doors to Wednesfield Technology Primary School in Wolverhampton were opened to its first cohort of pupils in September 2024. HOPPE (UK) products were selected for the architectural ironmongery package...

They were specified and supplied by Mark Parry at Locks and Fittings, a family-run business based near the site and a long-term partner of HOPPE (UK). As a GAI-registered architectural ironmonger, Mark led the specification to ensure full compliance with British Standards and the particular needs of a primary school setting.

Commissioned by Shireland Multi Academy Trust and delivered by main contractor Tilbury Douglas, the 446-place school is designed to support a technology-led curriculum in a purpose-built environment.
It is situated on the site of the former Edward the Elder School, which was demolished in 2022 after 112 years, replacing a derelict building with a forward-thinking, low-carbon facility designed to Passivhaus standards.

To maximise fire safety and energy performance – aligning with the Trust’s ambition to reduce its carbon footprint across the region – the school was constructed using a Structural Insulated Panel System (SIPS) method.

Architectural ironmongery tailored to modern teaching environments

All ironmongery was packed door-by-door to streamline on-site installation and was supported by early sample provision to the door manufacturer, allowing precise machining of factory-prepared doorsets.

A range of HOPPE (UK) products were supplied across the school, each selected for durability, user safety and low-maintenance operation:

• Cam action door closers were used throughout classrooms and internal fire doors, offering ease of use for younger pupils while maintaining compliant closing forces.
• Grade 4 stainless steel lever handles provided high durability for a high-traffic environment, designed to withstand regular use and occasional misuse.
• Pull handles were chosen in extended lengths, ensuring accessibility for both children and adults.
• Heavy-duty projection and floor-mounted doorstops, including magnetic collapsible versions, were used to reduce damage from impact and tampering.

Specification to suit a school environment

The ironmongery specification was shaped by the practical demands of a primary school, where hardware must withstand frequent use, support safeguarding and remain straightforward for staff to manage.

Non-coin turn and release sets were fitted to toilet doors in line with the Department for Education requirement for schools to use a bathroom lock “that can be locked from the inside by turn or lever and can be released from outside by a non-coin slot key”. 

This allows authorised staff to gain emergency access using the appropriate release key while reducing the risk of misuse, tampering or improvised opening by pupils. This makes them particularly well suited to school environments, where privacy, supervision and safe intervention all need to be balanced.

Euro-profile escutcheons complemented the ironmongery with a clean, tamper-resistant finish.

Locks, sash locks and bathroom locks were supplied to the door manufacturer as mortice samples for precision cutting ahead of installation.

Intumescent packs were included to meet fire resistance requirements across all relevant doorsets.

Supporting sustainable education

While the ironmongery specification was not directly influenced by the building’s Passivhaus status, the selected HOPPE products aligned with the overall ethos of quality, longevity and reduced environmental impact through low maintenance and high durability.

Seamless delivery and local legacy

The ironmongery package was delivered over a six-month period from January 2024.

Despite typical late-stage variations such as additional doors and keying requirements, all components were supplied and scheduled efficiently, helping to ensure a smooth handover.

The project also carries personal significance for the delivery team. Both Mark Parry and colleagues from HOPPE (UK) had family connections to the former school on the site, adding a sense of pride to the successful delivery of a landmark facility for the Wednesfield community.

HOPPE (UK)’s involvement in the Wednesfield Technology Primary School showcases the brand’s ability to meet complex performance, safety and compliance requirements in demanding educational environments.

Through its trusted partnership with Locks and Fittings, HOPPE has once again delivered reliability to help support the next generation in a safe, secure and future-ready school.

www.hoppe.com

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

The value of partnership

In the door and hardware sector, the most effective solutions rarely come from a catalogue alone. They come from conversation and a clear understanding of what a customer is wanting to achieve. There also needs to be willingness to work through challenges that are faced by the customer together. 

Karen Nelson, business development manager at HOPPE (UK), details the company’s approach to customer collaboration, with insight from Robust’s commercial director Paul Williams.

For HOPPE, success is not simply about supplying hardware. It is about listening to customer needs, applying technical expertise and helping customers reach the right outcome for their market.

Its long-standing relationship with steel door manufacturer Robust UK is a strong example of that approach in action.

Over the past decade, the conventional supplier relationship has developed into something deeper. It is a prime example of a working partnership built on trust, continuity and a detailed understanding of a customer’s business.

Learning through collaboration

That depth of knowledge matters when a new requirement emerges. Robust recently identified a need for a cost-effective PAS 24-compliant panic exit hardware solution for its single and double steel security doors, bridging the gap between a basic low-cost offering and significantly more expensive higher security options.

The collaborative process began with exploratory testing using standard panic hardware from ARRONE, a HOPPE brand, and a typical door from Robust. This provided a benchmark and helped the team better understand the test itself. The early result provided valuable insight and was a crucial stage in development to help shape the solution required.

That first stage gave both businesses a clearer picture of what needed to change. Robust gained a better understanding of what was needed from the door, while HOPPE used the findings to refine and develop a more appropriate hardware solution. It was a process rooted in openness and problem solving.

As Paul Williams, commercial director at Robust, explains: “Both sides needed a clear understanding of the project goals and the flexibility to adapt their part of the solution to achieve them.”

Engineering support that adds value

Dan Savage, product engineer at HOPPE, played a central role in that development journey.

His involvement spanned research, design and testing, giving the project a more streamlined path from concept to refinement. The company invested in additional test equipment so it could build its own testing capability further, carry out more indicative work in-house and go into third-party testing with greater confidence.

From Robust’s perspective, that practical support was important. Paul added: “HOPPE took the lead in arranging early test fitting and indicative testing of the new SECUR-DOR 2.1, helping to prove the approach before Robust committed it to a full-scale test programme.”

All of that speaks to one of the biggest strengths HOPPE brings to customer relationships, which is practical support backed by technical expertise. Huge investment is made in training to help staff achieve the widely respected qualifications from the Guild of Architectural Ironmongers (GAI).

A relationship built to last

In the case of Robust, the relationship already had strong foundations. Years of liaison with the same team had created familiarity, responsiveness and mutual confidence.

Paul said: “HOPPE has demonstrated over time that it understands the Robust business, its product requirements and where value can be engineered into a solution without compromising quality.”

The wider benefits of partnership working are clear. There is the pooling of resources, with each side contributing what it knows and what it can do. Shared knowledge and learning help to improve the final outcome.

There is also the longer-term value that comes from the process including the confidence, capability and insight that can be taken into future projects.

“This strengthened partnership sets the scene for future collaboration and a better understanding of how to define the initial specification at the outset of a development project,” adds Paul.

Partnerships like this bolster HOPPE’s position, not just as a supplier, but as a responsive, solution-led partner with the engineering flexibility to tackle new challenges.

The relationship with Robust reflects a mindset that HOPPE wants to bring to customer partnerships more broadly.

It is a mindset built around listening first, staying engaged and being open to new ideas. Not every project follows a straight line. But when both sides are prepared to share expertise, work through obstacles and keep sight of the end goal, the result is often better than either could achieve alone.

Why partnership matters

In a market shaped by regulation, performance demands and commercial pressure, that kind of partnership has real value. The relationship between HOPPE and Robust shows that finding the right solution is not about forcing a standard answer. It is about understanding the challenge, bringing the right knowledge to the table, and working together to achieve the best possible outcome.

www.hoppe.co.uk

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

‘Sleek, contemporary aesthetics with genuine everyday usability’

Mila has unveiled its new ProCore range of contemporary door and window handles – a versatile and competitive collection engineered to suit a wide range of profiles and applications. 

Combining sleek, contemporary aesthetics with genuine everyday usability, ProCore handles are crafted to deliver Mila’s renowned quality standards.

For enhanced durability, the door handle features separate internal and external spring cassettes, ensuring a reliable return to 90° and helping to prevent ‘handle sag’ over time.

Suitable for uPVC, aluminium and composite doors, and designed for both left‑ and right-handed applications, the handles are available with 92mm fixing centres (PZ) or split 92/62mm options to suit a wide range of multipoint locking systems.

Fabricators and installers can choose from lever/lever, lever/offset lever and lever/offset pad configurations, helping to achieve the right balance of accessibility for each project. Blank and blind backplate options are also available for non-locking doors. The range is further enhanced by a choice of standard and slimline backset options, ensuring suitability across a wide variety of profiles.

ProCore handles are available in a wide choice of finishes to complement modern doors and windows: White, Satin Black, Anthracite Grey, Dark Chrome, Polished Gold, Brushed Stainless Finish and Chrome.

Certified quality

Both the ProCore door and window handles are tested to meet demanding industry standards, underlining their strength, durability and long‑term performance. Door handles comply with BS EN 1906:2012, achieving 100,000 operating cycles and withstanding an 80kg lever pull, while window handles meet the same standard with 25,000 operating cycles and 6,250 lock barrel cycles.

The ProCore range is tested to BS EN 1670 for corrosion resistance, achieving up to Grade 5 performance, including 480 hours of salt spray testing, depending on finish. In addition, ProCore window handles also comply with BS EN 13126‑3:2011 at 50kg, further demonstrating their robust construction and reliability.

All hardware in the ProCore range comes with Mila’s 10-year mechanical guarantee, as well as a surface finish guarantee that covers painted finishes for 10 years and decorative finishes for five years, providing complete confidence for fabricators and installers alike.

www.mila.co.uk

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

Design & Supply: Committed to Safer Buildings Through Secured by Design

For nearly 40 years, Design & Supply has remained committed to one simple principle: delivering steel doorsets that perform as intended. Through continued investment in testing, certification and manufacturing expertise, the company has built a reputation for supplying independently verified solutions that meet the demands of modern construction.

Since 1986, Design & Supply has been manufacturing and supplying steel door solutions from its facility in Merthyr Tydfil, supporting projects across the UK. From security-rated and fire-rated doorsets to flood protection and Slimline architectural systems, independent testing and certification have remained central to the company's approach.

As security requirements continue to evolve across the construction environment, architects, specifiers and contractors are increasingly looking for products that offer more than manufacturer claims alone. They need confidence that the products they specify have been independently assessed, tested and proven to perform in real-world applications.

 For Design & Supply, this commitment to independently verified performance is reflected through its membership of Secured by Design (SBD), the official police security initiative that promotes the use of products and standards proven to reduce crime and improve security.

Secured by Design works to create safer places through effective security standards and the specification of accredited products. Its Police Preferred Specification accreditation provides reassurance that products have undergone rigorous testing and meet recognised security requirements.

The principles behind Secured by Design closely align with Design & Supply's approach to manufacturing. Across utility compounds, national defence installations, substations, critical infrastructure and public-sector facilities, security forms a fundamental part of the overall building specification. 

These environments often require security, fire protection, thermal performance, durability and architectural considerations to work together without compromise. Where unauthorised access can have significant operational and safety implications, independently tested security solutions provide confidence that buildings, assets and essential services remain protected.

To support these applications, Design & Supply manufactures a range of security-rated steel doorsets independently tested and certified to LPCB LPS 1175 SR1, SR2, SR3 and SR4 levels. These ratings provide clearly defined levels of protection, allowing architects and specifiers to select the most appropriate solution for the specific risks associated with a project.

Tom Grother, Director at Design & Supply, said: "For architects, specifiers and contractors, independent testing provides confidence that a product has been assessed against recognised standards and will perform as expected. Our membership with Secured by Design reflects our commitment to providing proven, tested solutions that support safer buildings and environments."

For Design & Supply, continued investment in testing, certification and product development remains central to the company's long-term strategy. By maintaining independently certified products through UKAS accredited test bodies and supporting initiatives such as Secured by Design, the business continues to provide solutions to meet the evolving demands of modern construction.

By combining proven manufacturing expertise with independently certified products, Design & Supply continues to support safer buildings through Secured by Design principles.

www.designandsupply.co.uk

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

ASSA ABLOY expands Test Centre to offer ultimate customer experience

ASSA ABLOY is delighted to announce the expansion of its enhanced UK test centre – UKAS-accredited in recognition of its commitment to the very highest testing standards.

Now spanning 691 square metres, Heywood Williams Components Limited trading as ‘ASSA ABLOY Test Centre’ has increased testing capability within its facilities. This enables it to offer enhanced capacity and a smoother workflow, providing customers with quicker results alongside complete confidence that their products are being rigorously assessed.

ASSA ABLOY promises to provide all test reports and certificates within two weeks of a successful test, highlighting its dedication to delivering market-leading service to customers.

100% independent testing

Fully independent, secure, and confidential, the facility welcomes the products of all external customers and offers a comprehensive range of tests. These include PAS 24 enhanced security testing for doorsets, BS EN 1670 corrosion resistance for doorsets, and BS 6375-1 weathertightness.

The efficient testing processes in place and increased capacity, mean quicker results and reporting. Each test serves to validate the security and durability of the product in question, ensuring they meet the relevant standards while improving their performance and reliability.

In addition, real-time test-viewing is available for customers who wish to observe tests in dedicated viewing areas; there is an on-site training room for collaborations and presentations; and ASSA ABLOY’s technical services are on-hand to advise on any adjustments and improvements that may be needed to advise compliance.

Conveniently situated

Based in Daventry, Northamptonshire, the fact that the ASSA ABLOY Test Centre is in the UK helps to remove reliance on overseas facilities and reduce lead times. It is easily accessible from the motorway and conveniently positioned for both northern and southern routes, as well as offering free on-site parking and EV charging.

Staff Cooke, Technical Director at ASSA ABLOY, comments: “We’re thrilled to be opening our expanded Test Centre, now with UKAS accreditation to give our customers absolute assurance that our testing meets strict, nationally recognised standards. Just as importantly, tests are carried out by specialists who understand the products inside out—because we test windows and doors every day.

“What the ASSA ABLOY Test Centre really offers is this: an independent, first-class testing facility that combines accredited processes with real product know-how. Unlike generalist centres that may switch from one type of test to the next, our team understands what matters when setting up and assessing windows and doors—right down to the details that can affect performance. This gives UK manufacturers everything they need to innovate and produce the best compliant security and safety products they can.”

The expanded ASSA ABLOY Test Centre is one of the first ASSA ABLOY sites to fully reflect ASSA ABLOY’s new 2026 identity, featuring a clean, modern aesthetic and enhanced customer-journeys designed around clarity, innovation, and trust.

To find out more, please visit: assaabloy.com/test-centre

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

Martec Introduces New Premier Shield Steel Security Doorset

Secured by Design (SBD) member Martec Engineering has announced the launch of its latest product, the Martec Premier Shield, a high performance steel security doorset designed to meet the demands of modern construction.

Founded in Glasgow in 1985, Martec specialises in the design, manufacture and installation of glazing systems. With decades of experience and fully integrated in-house manufacturing capabilities, the company has established a strong reputation for delivering robust, high quality solutions across a wide range of sectors, including residential, commercial and public buildings.

Kenny McHugh, Secured by Design, commented: “It is always great to see new products coming to market - Martec and this new product represents a positive step forward, aligning with proven security principles that help prevent crime and improve community safety.” 

The Premier Shield doorset has been engineered to combine security, durability and thermal performance within a single, cohesive system. Certified to PAS 24, the doorset meets the requirements of Secured by Design standards, providing assurance that it has been tested against recognised measures of security performance.

The doorset incorporates high performance glazing, including laminated and toughened glass designed to enhance resistance to attack, alongside advanced ironmongery featuring fail-safe electromagnetic locking systems. This combination supports a secure and reliable entrance solution suitable for a variety of applications.

In addition to its security credentials, the Premier Shield has been developed with efficiency and design in mind. Its thermally broken construction contributes to improved energy performance, with an indicative whole-unit U-value of 1.8 W/m²K. The doorset also offers a high level of design flexibility, with a range of finishes including polyester powder coated steel or stainless steel, allowing it to integrate effectively within different architectural settings.

The system is available in multiple configurations, including single leaf options with inward or outward opening, and can be specified with entry control or fully automatic operation. Integrated access control options are also available, enabling the doorset to support modern building management requirements.

The introduction of the Premier Shield further strengthens Martec’s portfolio of steel door and glazing systems, reflecting the company’s ongoing commitment to developing solutions that balance security, performance and design. Martec proudly state that research and design is ‘very much at the forefront’ of what they do.

Karen Dickie, Sales Director at Martec says: “The addition of the Premier Shield door gives us a brilliant addition to the range. Suitable for new build social housing developments it provides the modern appearance of a welcoming entrance, with the strength of a top class security door. Allowing inward and outward opening directions, we are confident this will follow in the footsteps of our Premier E door and become a market leader in this sector.”

www.securedbydesign.com

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

New extra feature for DIJ Spring 2026: Why Quality Matters

Quality underpins every decision in the industrial door, shutter, and garage door sector: from material selection and fabrication methods to installation, service, and long-term performance. For Spring 2026, Door Industry Journal is introducing Why Quality Matters, a brand-new premium supplement and the first in a new series of exclusive DIJ features launching throughout the year.

Designed to set the tone for what follows, Why Quality Matters will spotlight manufacturers, suppliers, and installers who place quality at the heart of their business. This isn’t about shortcuts or box-ticking; it’s about craftsmanship, consistency, accountability, and pride in delivering excellence across products, people, and processes.

As the inaugural feature in this new series, participants will have the opportunity to be first to shape the conversation and be associated with the launch of a major new DIJ initiative. The supplement will explore how businesses define and uphold quality internally, from leadership and company culture through to the factory floor and installation teams. It will examine the role of materials, fabrication processes, testing, and attention to detail in delivering doors and shutters built for demanding commercial environments.

Quality doesn’t stop at production. The feature will also highlight best practice in installation, aftersales support, training, compliance, and maintenance: recognising the teams behind the products, from skilled fabricators and engineers to installers, service professionals, and customer support staff.

To protect the focus and premium positioning of the supplement, participation is strictly limited. While a number of companies will be approached directly by the DIJ team, a small number of places are available on a first come, first served basis, subject to alignment with the ethos of the feature.

If quality genuinely drives your business and you’d like to be among the first companies featured in this new DIJ series, now is the time to get involved. Once places are filled, no further opportunities will be available.

To find out more, call Rob or Steve on 01226 321450 or email rob@cvgroup.co.uk or steve@cvgroup.co.uk  

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

Leading the Way with Expanded UKAS Accreditation and Bespoke Testing Support

Winkhaus Laboratories has once again demonstrated its leadership in the fenestration testing sector with the renewal and expansion of its UKAS accreditation. The updated scope now includes the 2024 addendum for PAS24:2022, solidifying them as a premier destination for customers with their comprehensive, accredited testing services.

As one of the first laboratories to be audited and approved by UKAS for testing to PAS24:2022, they now offer assessments to the new 2024 addendum PAS24:2022 +A1:2024, which introduces new tools to the attack testing for both PAS24 and TS007-1. A two year transition period to adopt testing to the new standard has been set for January 2027, with the laboratory team there to support customers in their compliance journey, helping them adapt efficiently and effectively.

This falls as part of a wider update of security testing, with changes to the security part of building regulations (Approved Document Q or ADQ) expected in the near future, that will no longer reference earlier versions of PAS24, from 2016 or earlier, and that will widen the scope of ADQ from new build projects to include refurbishment projects for the first time. Manufacturers and fabricators will therefore need to plan a review of their existing test evidence, or plan to create fresh evidence in line with these standards changing.

“Transitioning to the updated standards and new addendum doesn’t mean starting from scratch,” explains Ade Collins, Laboratory Manager at Winkhaus UK. “Our approach involves reviewing existing test data, identifying gaps, and creating bespoke testing programmes that build on what our customers already have. This saves both time and money while ensuring compliance.”

This consultative approach is a hallmark of Winkhaus Laboratories. With almost 50 years of experience in testing, development, and product innovation, the team offers more than just pass/fail results. Their Technical Development Days are a standout service, designed to help customers refine products before formal testing begins. These sessions allow for early identification of any potential vulnerabilities, enabling iterative design improvements without the cost and delays of full-scale testing.

“Traditional testing can be a bottleneck in product development,” advises Ade Collins. “Our development days provide a low-risk environment to explore design tweaks and validate concepts, giving our partners confidence before committing to full accreditation testing.”

Winkhaus’ bespoke development process is further supported by in-house Computer Aided Design (CAD), 3D prototyping, and close collaboration between the product, technical, and laboratory teams. This integrated approach accelerates time-to-market and enhances product competitiveness, particularly valuable when working with new profile concepts or custom hardware solutions.

The laboratory’s capabilities span a wide range of testing services, including PAS24:2022 & +A1 2024 addendum for enhanced security performance, BS6375 parts 1–3 for doors and windows, BS EN1634-3 for smoke control, and TS007-1 for security hardware. With the latest UKAS accreditation updates, Winkhaus remains uniquely positioned to offer its customers a full-spectrum of testing aligned with the latest industry standards.

Established for over 25 years and a proud member of United Kingdom Accreditation Service (UKAS), the British Measurement and Testing Association (BMTA), and the Test House Studies Group chaired by Secured by Design, Winkhaus Laboratories continues to set the benchmark for quality, innovation, and customer support in the fenestration industry.

For more information or to discuss your testing requirements, contact the team at test.lab@winkhaus.co.uk or visit www.winkhaus.co.uk

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

An exciting new chapter: Clearview Group’s first DIJ - Summer Issue 2025

Welcome to the Summer 2025 issue of The Door Industry Journal, and if you think things seem a little bit different, that’s because they are…

This edition marks the beginning of a brand-new chapter, as DIJ becomes part of the Clearview Group family.

We’re delighted to be taking the reins and incredibly proud to be continuing the legacy of a magazine that’s been such a trusted voice in the industry for so many years.

True to form, I've picked out some summer headlines that highlight the articles in this issue:

Novoferm turns up the heat as it celebrates 70 sunny years in manufacturing, catch the milestone on page 10.

Get a fresh take on growth as GfA UK builds brighter futures through training,full story on page 24.

Skills are sizzling as DHF and ADSA wrap an 18-month CiTB programme, see how on page 31.

Trade gets a summer-ready upgrade with JDUK and Wisnioski’s sectional door partnership, details on page 40.

Cool news from Marantec as they open a state-of-the-art training centre, step inside on page 52.

Feeling the heat? Hörmann UK has cold room doors to chill things down, turn to page 62.

Real-world testing meets summer performance as Ellard’s motors go full throttle, see the case study on page 71.

ADIA makes a hot case for upskilling this season, why it matters on page 88.

Stay cool and in control. Radiation resistance in fire curtains gets the spotlight on page 104.

Have a great summer, enjoy the magazine and please get in touch if you'd like to contribute or participate in the next issue.

See you next time,

Gemma

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Clearview Group Limited - Company No. 06999111

Return to the Door Industry Journal Website

DHF urges adherence to UK National Foreword to BS EN 15269-2:2024

Door and Hardware Federation (DHF) is strongly urging UK manufacturers of steel doorsets to follow the recommendation in the UK national foreword to BS EN 15269-2:2024, a standard that DHF has been instrumental in preparing.

This important update significantly enhances public safety by ensuring that extended application of fire resistance results is applied consistently and reliably. First published in 2012, the standard was subjected to a systematic review to ensure it remained aligned with evolving industry practices, advances in fire testing methodologies, and updated regulatory requirements, leading to the release of the 2024 edition.

“BS EN 15269-2:2024 is the standard providing extended application (EXAP) of fire test results for steel hinged doorsets, the latest revision of which was issued in December 2024”, explains DHF’s Senior Training & Compliance Officer, Steve Hill. 

“During its preparation, we were made aware of a potential issue occurring with the addition of a threshold, or additional frame member, at the base of the door leaf possibly causing failure of a doorset which may have passed a fire test prior to the addition of such items.

“The above standard allowed for such a modification to be made to the design, without undertaking any additional test. This could have led to door installations which were unsafe in the event of fire."

DHF made urgent representations to CEN and BSI regarding this matter; however, due to the advanced progress of the standard, it was too late to amend the relevant rule in the standard.

A decision was made by the responsible BSI committee (FSH 22/-/5), based on the information provided by DHF, for the UK to vote negatively to the revised standard, leaving the way open for the standard to be published with a UK national foreword. 

 The purpose of the foreword was to warn UK manufacturers of the recommendation that further fire test evidence be obtained before such a modification was made to a doorset design.

“Following publication of the standard in Europe, a group was formed within FSH 22/-/5, led by DHF, to agree a wording for this foreword; the standard has now been published by BSI with this foreword included,” concludes Steve.

To purchase the latest standard or to view the foreword, please visit: https://bit.ly/4lGCnKS

 

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

Return to the Door Industry Journal Website

Kent Company Wins Big with IronmongeryDirect’s TradeXtra Prize Draw

IronmongeryDirect, the UK’s leading online ironmongery specialist, is excited to announce the winner of its TradeXtra prize draw.

David Marguet-Turner, owner and founder of DMT Facilities based in Broadstairs, Kent has been announced as the lucky winner of 150,000 loyalty points to spend with IronmongeryDirect’s TradeXtra Rewards loyalty programme.

The prize draw ran between 7th October 2024 and 12th January 2025. Any IronmongeryDirect customer who opened a TradeXtra Account and registered for TradeXtra Rewards during this period were automatically entered into the prize draw.

David, a customer of IronmongeryDirect for over ten years who opened a TradeXtra Account in October, was thrilled to be presented with the prize and revealed that he is planning to use the points to book a holiday. 

“I can’t believe I have won!”

He exclaimed:

“This is a huge prize and I am really looking forward to spending the points against a great choice of items.

“I'd love to use the points to take the family on a special holiday.

“IronmongeryDirect is my go-to supplier – its customer service, delivery options, and range of products are top-notch.

“Thank you to IronmongeryDirect for this amazing prize!”

IronmongeryDirect’s TradeXtra Account provides customers with instant interest-free credit of up to £10,000 for up to 60 days, easy online account management, exclusive discounts and offers, and early access to promotions and prize draws – all with no annual fee or hidden costs.

TradeXtra customers can opt-in to join the TradeXtra Rewards loyalty programme, where members earn one loyalty point for every £2 spent on products from IronmongeryDirect, which can then be redeemed against a comprehensive catalogue, including rewards such as gift cards, exotic holidays, smart televisions, and gaming consoles.

Keri Bryce, Sales & Marketing Director at IronmongeryDirect, said:

“We were delighted to award David with the 150,000 loyalty points prize and hope he and his family enjoy whatever they decide to spend their points on.

“We are extremely proud to offer TradeXtra as a platform to support and reward our loyal trade customers with exclusive benefits and discounts.

“It’s just another way we are continuing to deliver our promise to provide great value products and service to our customers.”

IronmongeryDirect is the UK’s leading online ironmongery specialist, with over 50 years of trusted experience and over 18,000 products in stock.

Partnered with leading couriers, customers can order by 9pm for next day delivery (4pm on Saturdays) or choose Click & Collect from over 10,000 DPD parcel shops nationwide.

For more information or to apply for a TradeXtra Account, please visit www.ironmongerydirect.co.uk/tradextra.

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

Return to the Door Industry Journal Website

JELD-WEN signposts sector-specific standards to support ease of specification

Leading UK manufacturer of high-quality timber doorsets, JELD-WEN UK, has launched a new brochure to support easier specification across a range of market sectors – and to highlight its commitment to sustainability.

The brochure has been designed to provide specifiers and contractors with all the information they need in one place across a range of sector-specific uses, including education, hospitality, healthcare, residential settings, student accommodation and offices.

Recognising the increased importance of a demonstrated ESG policy in the supply chain, the brochure also clearly sets out the company’s commitment to sustainability.

Taking a top-level view, the brochure sets out all the key factors needed to specify doors in each setting, clearly signposting performance testing for standards including acoustics, fire resistance, durability and security – as well as guarantee details and fire door data tagging capability.

Further to highlighting the testing needed for use in a particular sector, the brochure flags up the additional technical expertise offered by JELD-WEN to support accurate specification at the earliest stage of a project, including QR links to the NBS specification platform and CPD training.

Breaking down the qualities of the door by project application, the brochure also includes details such as DDA compliance, Part M compliance, access control, and bespoke sizing.

Taking a closer look at JELD-WEN’s sustainability commitments, the brochure sets out key targets, and benchmarks the company’s performance in meeting these.

The brochure also details how the company can support compliance under the Building Safety Act through third party certification and the use of its recently launched fire door data pin, which is embedded into fire doorsets to store vital information to evidence the golden thread through the product’s lifetime.

Marketing Manager at JELD-WEN UK Amy Holmes said:

“The doorsets created by JELD-WEN are tested to incredibly high standards and meet the demands of a range of settings. We wanted a platform that could really showcase the breadth of this offering.

“Using standout graphics and lists, we aim to show at a glance how JELD-WEN doors meet the highest standards to allow for confident specification in sectors that require specific testing to be demonstrated.

“The demand for accessible data and information has become increasingly urgent and we wanted to make it as easy as possible for specifiers to find a doorset that meets the needs of their project – and we have flagged up the depth of support we offer beyond that initial specification.

“JELD-WEN is committed to meeting the very highest standards in performance and we are delighted to be able to bring this together in one place to show the range of applications that our doorsets can confidently be used in.”

Download the new interior doorsets brochure today at www.jeld-wen.co.uk/literature.

Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

Return to the Door Industry Journal Website