 |
| Ideal solution for car parks |
Previously, barrel assemblies were only possible for our direct drives such as tube motors and Safedrive®. The new chain drive option comes as a result of our technical team working to meet customers’ requests.
The chain drive arrangement allows the drive to be mounted inboard facilitating a between walls fix. This means customers can use the system where site conditions don’t allow a direct drive to be used, such as car park applications with limited side clearance.
 |
| Designed by the GfA technical team |
The Ranger chain drive barrel assembly design allows rapid site installation due to the unique barrel retention system which makes use of our proven barrel assembly drive end kit originally developed for our DLA Fire shutter drive packages.
Using a stepped drive end shaft to which is fitted a bearing held in place by a circlip, the bearing then locates in to the bearing holder and is held in position by a spring rod retainer, allowing the barrel assembly to be dropped in to place and secured.
The system incorporates drive chain tensioning slots on the "Top Hat" mounting bracket allowing our 32rpm and 48rpm Ranger drive units to be mounted either horizontally or vertically.
For high opening speed shutters or high usage single phase applications the system can also be fitted with the 80rpm Ranger FI drive unit.
Four barrel sizes (101.6mm x 3.7mm, 127mm x 3.2mm, 139.7mm x 3.2mm and 168.3mm x 5mm) and four Ranger drive units (Ranger 90, Ranger 90W, Ranger 150 and Ranger 140Fi) are available, allowing doors up to 6m wide x 6m high to be driven, including high-usage doors.
Four barrel sizes (101.6mm x 3.7mm, 127mm x 3.2mm, 139.7mm x 3.2mm and 168.3mm x 5mm) and four Ranger drive units (Ranger 90, Ranger 90W, Ranger 150 and Ranger 140Fi) are available, allowing doors up to 6m wide x 6m high to be driven, including high-usage doors.
 |
| Selection chart available from GfA UK Ltd |
The correct combination of drive and barrel assembly can be chosen from the selection charts available from GfA UK.
All Ranger drive units are compatible with our range of TS control panels and interconnecting cables allowing a complete ‘plug and play’ solution. You can find out more about the benefits of our Ranger drives here.
500mm square plate now available for Safedrive®
The new 500mm square plate for Safedrive® eliminates the need for customers to make their own plates in the rare cases where our standard 406mm plate is not big enough for the application. And it gives you the extra reassurance that our technical team have specified and calculated all the load requirements and had the relevant stress tests conducted, so that the plates are correctly engineered.
The 500mm plate can be used with Safedrive® motors from 350Nm to 650Nm.
For help to spec the right solution for your application, please contact our Technical sales team on 01926 452452
Connect with GfA UK on twitter @GFAUKLtd or call 01926 452452
All Ranger drive units are compatible with our range of TS control panels and interconnecting cables allowing a complete ‘plug and play’ solution. You can find out more about the benefits of our Ranger drives here.
At a glance
• End plates and safety brake included
• 4 barrel sizes available
• Use with 4 Ranger drive units (including the high speed Ranger Fi)
• Easy-fit
• High frequency doors up to 6m x 6m
• Ideal for ‘tight-fit’ applications
500mm square plate now available for Safedrive®
The new 500mm square plate for Safedrive® eliminates the need for customers to make their own plates in the rare cases where our standard 406mm plate is not big enough for the application. And it gives you the extra reassurance that our technical team have specified and calculated all the load requirements and had the relevant stress tests conducted, so that the plates are correctly engineered.
The 500mm plate can be used with Safedrive® motors from 350Nm to 650Nm.
For help to spec the right solution for your application, please contact our Technical sales team on 01926 452452
Connect with GfA UK on twitter @GFAUKLtd or call 01926 452452
Scroll down to read more articles like this which have been published recently
Why not Sign-up to Receive these Articles by Email each Day
Why not Sign-up to Receive these Articles by Email each Day
* Read more current and archived articles on our dedicated website *
Low Cost and Free Publicity - Your company can easily benefit from some publicity like this in return for a contribution towards our layout costs (typically £30 plusVAT), payable via PayPal or credit card or receive the service absolutely free of charge if you advertise (see below).
We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.
To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.
If you take display advertising or product and literature features in our printed and online publications, you will qualify for regular free postings on this blog while you continue to advertise with us.
For details on features and advertising rates please contact us or visit our website.
Door Industry Journal is a trading style of Avalon Innovations LLP Company Registration No. 06807833
No comments:
Post a Comment