Monday 8 July 2024

Flight risk: Access control to mitigate airport power outages

Amidst recent news reports of power outages at a UK airport, Abloy UK highlights the need for effective access control solutions that maintain security even when the power supply is disrupted.

Steve Wintle, Head of Critical Infrastructure at Abloy UK, explains:

“We cannot stress enough the importance of building in security and safety resilience within national infrastructure, particularly when it comes to areas such as access control.

“Even in cases where emergency backup energy supplies are available via generators, the resultant power surges can cause chaos in the short term and long-term damage too.

“When power is restored, singular or multiple surges can cause damage to the physical infrastructure, which can then require extensive repair by engineers to become operational again.

“However, there are solutions that remain operational even during these types of incidents.

“By combining the PROTEC2 CLIQ system and electric locks from Abloy UK, airport security and facilities managers can build resilience into transport hub operations - even during a power cut.”

Door magnets, which require a continual power supply, are often used in airport environments as part of the access control solution due to their simplicity of installation.

Still, a power surge can render them useless and leave areas insecure. 

There are also fire risks associated with installing a magnet on a door used as a fire escape, as they require special arrangements to guarantee they are always fail-safe in an emergency. 

For example, some door magnets require an alarm or ‘request to exit’ mechanism to allow someone to exit, so there could be life-threatening delays for people needing swift egress in an emergency.

There are also a number of building regulation standards related to access control.

Adherence to these is essential to ensure safety and security.

These include BS179 Emergency Escape (for when the building occupants are aware of the building environment), BS1125 Panic Escape (for environments used by the general public) and the new standard BS13637 Electronically Controlled Escape Systems (for use on escape routes).

These standards state that even if a door is electronically controlled for access, there must be a compliant mechanical means of escape in an emergency.

Electric locks, therefore, maintain security and safety without power and without compromising security.

If the PROTEC2 CLIQ solution is also installed as an override, then facilities managers and airport security can maintain access control, as it requires no power and no infrastructure.

PROTEC2 CLIQ enables authorised timed access for staff and contractors, the ability to enable and revoke key authorisation remotely, and the deletion of lost keys.

This offers substantial time savings and operational efficiencies in key collection between airside and landside.

The solution also provides full audit trail reports and can be integrated with permit-to-work systems, offering 100% control of all keys, 100% of the time.

Steve adds: 

“Airports are a vital part of our critical infrastructure, and service resilience is crucial.

“The recent power outages at a UK airport and the subsequent disruption have highlighted the need for better standards in security and access control provisions.

“With solutions available to mitigate risks and ensure the continuation of services, now is the time to invest in effective, reliable systems that are both scalable and flexible too.”

For further information on Abloy's products and services, visit https://bit.ly/3RSQ6AW, call 01902 364 500, or email info@abloy.co.uk





Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

No comments: