DHF issues warning following school accident

Tamworth-based Door & Hardware Federation (DHF) has urged caution regarding reducing gaps at hinges, following an accident at a school in Surrey involving a five-year-old boy. 

During a resulting UK Health and Safety Executive investigation into the incident, it was revealed that the boy’s hand slipped and went into the reducing hinge gap of a doorset in the school; there was no guard installed and the incident led to the tip of his middle finger becoming detached. In a newer building at the school, hinge guards had been fitted on the doorsets. 

 The trust was prosecuted under Section 3(1) of the Health and Safety at Work Act 1974, duty of care to persons other than employees and in October this year, was fined £6,000 and ordered to pay an additional £6,875.70 in costs.

“The subsequent investigation discovered the trust had failed to identify the hazard which meant hinge guards were not installed on the doors in the older building,” explains DHF’s Senior Training & Compliance Officer, Nick Perkins. 

“This particular case serves as a timely reminder that all significant hazards must be identified and risk assessed, and where necessary, protected or eliminated, even on manual doors and gates. Clearly, the risk based on degree of harm, likelihood of occurrence and frequency of exposure means that reducing hinge gaps are high risk in premises with considerable numbers of vulnerable people present. 

“Whilst for powered doors, gates & barriers there is a very clear requirement in supply of machinery safety law to eliminate or protect all reachable reducing gaps, there is also a need to risk assess all doors, gate and barrier installations (including manual systems) under health and safety law, especially those fitted with spring loaded self-closing devices.”

Ultimate responsibility for safety within and about a premises lies with the owner or manager, but it is important to note that maintenance providers also have a legal obligation to identify and inform their clients about the safety of doors, gates and barriers they are repairing or maintaining; where possible, they are required to leave the system (hand it back to the client) in a safe condition.

Information regarding the supply of machinery safety law comprises UK: 

Supply of Machinery Safety Regulations 2008, and Republic of Ireland: European Communities (Machinery) Regulations 2008; National health and safety law comprises UK: Health & Safety at Work Act 1974, Northern Ireland: Health & Safety at Work Order 1978, and Republic of Ireland: Safety, health and welfare at Work Act 2005; Workplace Safety Law comprises UK: Workplace (Health, Safety & Welfare) Regulations 1992 , Northern Ireland: Workplace (Health, Safety & Welfare) Regulations (NI) 1993, and Republic of Ireland: Safety, Health and Welfare at Work (General Application) Regulations 2007.

“DHF also delivers training for Automated Gate Group, Industrial Door Group and Garage Door Group members on the topic of reducing gaps; in addition, further information can be found in DHF publication, TS 013: https://bit.ly/DHFTechnicalSpecifications,” concludes Nick.

DHF represents all the key players in the following sectors: locks and building hardware, doorsets, industrial doors and shutters, domestic garage doors and automated gates.

With the ultimate aim of maintaining and raising quality standards throughout the industry, all DHF members must meet minimum standards of competence and customer service. They all operate within a Code of Conduct governing standards of workmanship, quality assurance, training, safety, business integrity and CE marking compliance.

Door & Hardware Federation

01827 52337

www.dhfonline.org.uk








Why not Sign-up to Receive these Articles by Email each Day on our newsfeed site

>> Scroll down to read more articles like this which have been published recently on this blog <<

You can also read additional current and archived articles on our dedicated magazine website

Low Cost and Free Publicity - Your company can easily benefit from some publicity like the posts above for a contribution towards our layout costs (£75 to £95 plus VAT), payable in advance or you can receive the service absolutely free of charge if you advertise (see below).

We post articles up to twice a day and never delete them - we only archive them each year so that they continue to remain visible to search engines.

To have your story published - just send us your news item, logo and image(s) and we will review the material, make any necessary changes to the wording / wordcount and then advise you when it will be published.

If you are a regular advertiser in our printed and online publications, placing series bookings for adverts or subscribing to our VIP Packages, you will qualify for a specific number of free postings on this blog while you continue to advertise with us. See our media pack for more details.

Also, if you purchase one of our Online and Print Combo packages, Featured Articles or Advertorial packages shown in our media pack, posting on this blog is included in the price.

For details and rates for all of our advertising options in print and online, download our media pack contact us or visit our website.

Door Industry Journal is a trading style of Avalon Innovations LLP - Company No. OC364751

Return to the Door Industry Journal Website